Penetrometer Bath
. Conforms to ASTM and related specifications
. Conditions petroleum samples and others requiring close temperature
control prior to or during testing
. For use with manual and microprocessor penetrometer models
. Digital temperature control with low-liquid and over temperature
safety cut off
Constant temperature water bath for conditioning samples prior to a
penetration test. Full visibility bath has a large shelf to accommodate a wide
range of sample containers, including all containers used in ASTM tests.
Sample containers can be left in the bath during the penetration test if required.
The base of the Koehler manual penetrometer can be placed directly on the
shelf of the bath, or the head assembly of the digital automatic model can be
reversed to overhang the bath. Microprocessor digital temperature control
maintains bath liquid temperature with ±0.05°C stability throughout the
operating range. A large LED provides bath temperature readout in switch-able
°C/°F format and a dual-speed circulating pump assures temperature
uniformity. The bath is protected by a separate adjustable over temperature
thermostat and a low liquid cut-off. A built-in cooling coil is provided for
circulating a refrigerated coolant or tap water if needed.
Specifications
Conforms to the specifications of:
ASTM D5, D217, D937, D1321, D1403, D2884, D5329
Temperature Range: Ambient to 70°C
Temperature Stability: 0.05°C (0.1°F)
Electrical Requirements :
115V 60Hz, Single Phase, 9A ; 220-240V 50/60Hz, Single Phase, 4.5A
Dimensions
18x13 1/8x8 1/2 (45.7x33x21.6)
Net Weight: 6 lbs (2.7kg)
Shipping Information
Shipping Weight: 10 lbs (4.5kg)
Dimensions: 1.2 Cu. ft.