Grease Workers
. Conform to ASTM D217 and related specifications
. Mechanical and manually operated types
. Single and double-unit models
Mechanical Grease Workers - For "worked penetration" and "prolonged
worked penetration" tests to determine consistency of lubricating greases.
Consists of single or dual steel ASTM grease workers mounted on a sturdy
base and driven by a powerful gear reduction motor. Meets ASTM
specifications for stroke length and rate. Equipped with a presetting
electronic counter that automatically shuts off the drive motor after any desired
number of strokes up to 99,999. Steel grease workers have threaded cup and
cover, and steel plunger plate with shaft and handle that connects to eccentric
cam on drive unit. Accessory dial thermometer inserts in plated vent cock.
Spring loaded tightening clamps hold grease workers securely on base, and
steel pins in base facilitate disassembly of grease workers after testing.
Manually Operated Grease Worker - Hand lever operated grease working
machine designed for short duration "worked penetration" tests on lubricating
greases. Consists of one steel ASTM grease worker with hand lever
mechanism mounted on a sturdy steel base. Spring loaded tightening clamps
hold grease worker securely on base, and steel pins in hand lever upright
support facilitate disassembly of grease worker. Base plate is drilled at corners
to allow for bolting to table top.
Specifications
Conforms to the specifications of:
ASTM D217, D4950; IP 50; ISO 2137; DIN 51804; FTM 791-311, 791-313*
*Requires substitution of 270-hole grease worker (K18030)
Drive Motor: fan cooled gear reduction type, 1/3hp (single-unit model)or 1/2 hp (dual-unit model)
Electrical Requirements :
115V 60Hz, Single Phase, 3A
220-240V 50/60Hz, Single Phase, 1.5A