Copper Corrosion from Petroleum Products

Copper Strip Corrosion Test Bomb

For aviation fuels and natural gasoline

Precision machined stainless steel bomb inserts in copper corrosion bath for testing aviation fuels and natural gasoline. Withstands test pressure of 100psi (689kPa) per specifications. Threaded cap with O-ring gasket and knurled circumference tightens by hand to a positive seal. A 1/8" groove in the bomb threads permits safe, gradual release of pressure when opening the bomb.

Ordering Information

Catalog No.

K25200 Copper Strip Corrosion Test Bomb

Accessories

K25080 Copper Test Strip
12.5x1.5-3.0mm x 75mm to ASTM specifications
332-004-004 Test Tube 25 x 150mm
332-004-002 Viewing Test Tube
Protects copper strip during inspection or storage
K25100 ASTM Copper Strip Corrosion Standards
Colored reproductions of tarnished strips encased in a plastic plaque
380-220-001 Silicone Carbide Paper, FEPA Grade, 220 grit
For polishing of copper strips prior to testing - Pack of 50 sheets
380-150-003 Silicone Carbide Grain, FEPA grade, 150 grit
For final polishing of copper strips prior to testing - 1 lb package
K25000 Polishing Vise
Holds copper strip firmly in place without marring the edges. Stainless steel, mounted on a composition base
K25090 Multi-Strip Polishing Vise
Similar to K25000 but capable of holding four strips at a time
250-000-12F ASTM 12F Thermometer. Range: -5 to +215°F
250-000-12C ASTM 12C Thermometer. Range: -20 to +102°C